JL-CNC-4228 Automatic Cutting Production Line

Note: Customized development can be carried out according to the special requirements of customers.

The feeding direction of JL-CNC-4228 automatic cutting production line is from left to right

1. Area of equipment working area: 13000 mm *5500 mm *900 mm (the following figure is the schematic diagram of equipment)

Equipment Composition: JL-42286 Single-turn Single-position Automatic Glass Sheet Platform (Mechanical)+JL-CNC-4228 Automatic Glass Cutting Machine+JL-4228 Glass Sheet Breaker Platform

Model JL-4228 Fully Automatic Glass Upper Platform (Double Turn Dual Position)

Equipment parameters and performance:

1. Equipment composition: equipment frame system, equipment transmission system, vacuum adsorption system, mechanical turnover system, electrical control system.

2. The vacuum system design is reasonable, the vacuum degree is high, the workpiece is absorbed quickly and the reliability is high.

3. The device has a key reset function. It only needs to press the touch screen to complete all the preparations before the automatic start-up, which greatly improves the work efficiency.

4. The equipment has fault alarm and safety alarm device.

5. Glass lifting mechanism adopts planar three-bar structure, which is more stable and reliable than previous lead screw lifting mechanism.

6. Machinery configuration: Reversal gear chain: high precision wear-resistant type, the chain adopts a fully enclosed structure, making the overall structure of the equipment beautiful, safe and reliable, to prevent accidents.

7. The overall arrangement of cables and gas pipes is reasonable and completely sealed.

8. Basic performance:

Outward Size of Equipment: 4550mm*3350mm*900mm

Upper Size: 4200*2800mm Flat Glass

Upper thickness: 3mm-19mm flat glass

Pick-up period: <50 seconds/piece

Upper flip arm: double flip, single sucker set to 4 arms 16

Power/power: 5.5KW

Installation power supply: 380V/50HZ

Equipment power: 4.5KW

Compressed air: 0.8Mpa (provided by users)

9. Technical description

1) Reversal mode and aspiration mode:

Mechanical flip, flip angle adjustable. It has the advantages of fast running speed, smooth operation and good stability. It can automatically take out glass sheets of various thicknesses of 3-15 mm, turn over arm with connecting rod device, and the depth of suction sheet can reach 750 mm.

2) Adsorption and transmission device: after vacuum sucker adsorption, chain transmission.

3) Operating mode: The equipment has two functional choices: automatic mode and manual mode, and the operation is convenient and intuitive.

4) Alarm device: with automatic detection device, it can automatically alarm and show the abnormal situation. It is equipped with emergency stop switch, which can be controlled in case of abnormality.

5) Operating interface: LCD touch screen display interface, Chinese display module, easy and fast operation (English operation interface can be installed)

6) Procedure setting: The number and sequence of work stations can be set automatically, and the equipment can walk automatically and automatically.

Take the sheet, automatic transmission.

7) Automatic Filming Process Description:

Walking Boom lifting Automatic induction glass Suction cup adsorbing glass Suction cup lifting suction to separate glass and frame return to the original position Boom reset conveying glass to the cutting machine.

8) Position walking mode: automatic adjustment to zero position, automatic detection, automatic return to the original position. Multi-station can be set according to customer's requirements.

9) The supplier is responsible for equipment installation, commissioning and training of the employee of the buyer, and the buyer is responsible for the combination of power supply, gas source and safety assembly.

JL-CNC-4228 Automatic Glass Cutting Machine

1. Equipment specifications:

Outward Size of Equipment: 4550mm*3350mm*1100mm

Cuttable Flat Glass Size: 4200*2800mm Flat Glass

Workbench height: 900mm + 50mm

Equipment weight: 3T

Cutting Thickness: 3mm-19mm Flat Glass

2. Cutting parameters:

Linear parallelism: <0.10m m/m

Diagonal accuracy: <0.15m m/m (the above accuracy is based on the accuracy of the cutting line before breaking the chip)

3. Power/power:

Installation power requirements: 380V/50HZ (three-phase four-wire), special circumstances can be adjusted according to customer requirements.

Actual power of equipment: 5KW

Compressed air: 0.6 MPa (provided by users)

JL-4228 air cushion glass breaker

Glass slicing system with air cushion float;

1. Desk Size: 4200*2800mm

2. Air Floating Device, High Density Plate Table

3. Power: 4.5KW

4. Multi-point ejector control function, convenient and reliable

5. Acceptance method: Dimensional accuracy is based on the distance between any two cutting lines. Measurements of 2mm thick glass, such as non-2mm thick glass, are based on the cutting line before stripping.

Warranty coverage:

Platform: In addition to human factors and rubber parts, the supplier will provide one year's quality assurance period for mechanical parts and electrical parts after the equipment arrives at the demander.

Cutting Machine: In addition to human factors and felt, belt, the supplier will provide one year's quality assurance period for mechanical parts and electrical components after the equipment arrives at the demander.

Opening stage: In addition to human factors and felt, ejector, the supplier will provide one year's quality assurance period for mechanical parts and electrical components after the equipment arrives at the demander.

Remarks:

The pipeline is suitable for glass cutting of buildings, hollow, doors and windows, furniture, household appliances, solar energy, handicraft, etc.

The pipeline realizes the functions of full-automatic film-feeding, automatic conveying and automatic cutting machine.

Operator: Upload: 0 people (full-automatic stage without personnel operation).

Cutting: 1 person (know basic computer operation, glass cutting experience).

Fragmentation: 2 people (with glass fragmentation experience).

Cutting efficiency: 60 seconds per piece.

Characteristic:

A. No special requirements for operators, simple operation and easy management.

B. Safety and efficiency. Fully automatic mounting table effectively ensures operation safety and prevents glass from breaking. Fully automatic conveying device reduces the workload of operators.

C. High cutting accuracy, good stability, can meet all kinds of production needs, effectively guarantee the quality of the later process and reduce the difficulty of processing.

D. High IQ cutting machine optimization software can greatly improve glass utilization rate and reduce production costs. Powerful gallery can ensure that equipment can cut various shapes of glass to meet the cutting requirements of various orders.

E. The automatic oil injection and pressure adjustment function of the cutting machine can effectively ensure the stability and cutting effect of the cutting glass.