When using any equipment, before working, we should check whether all process switches are normal. If we find something wrong, we should stop to check immediately, otherwise it will seriously damage the machine. Of course, glass tempering furnace is the same.

1. Preparations for operation of glass tempering furnace:

1. Wear good labor protection articles before going to work, check the air compressor fan steelmaking furnace transmission, air system and lubrication system is normal.

2. Check whether other relevant processes (grinding, punching) are qualified, as well as the preparation of film arrangement and receipt.

3. Understand the production content on duty, prepare shelves, packaging paper labels, cork mats and other items.

4. Check the preparation of tempered glass. For the quality problems such as blasting holes without edge grinding, it may caus

2. Basic process:

1. Adjusting process parameters according to glass thickness

2. Enter heating break

3. Adjust the distance between the windshield nozzle and the windshield gate.

4. After heating, enter the wind grate to blow.

5. Blow the windshield out of the windshield, finish.

3. Matters needing attention in the operation of glass tempering furnace manufacturer:

1. The computer of glass tempering furnace control system must be operated by a special person. It is strictly forbidden for non-operator to operate the computer privately and adjust the process parameters.

2. It is strictly forbidden to install all kinds of software in the computer, delete or modify internal documents, and strictly implement the computer switching operation procedures of the steelmaking furnace.

3. Perform production tasks on time and in quantity, strictly implement process regulations and equipment safety operation rules, and maintain the use of equipment to comply with safe, civilized production and rules and regulations.

4. During working hours, we shall not chat, make noises, do things unrelated to our work, prohibit drinking to work, and prohibit leaving work when the machine is turned on.

5. When mechanical and electrical faults occur in a small glass tempering furnace, it is necessary to stop the machine for inspection and repair in time, and notify the maintenance personnel to deal with them as soon as they are unable to solve the problem.