Glass Dual-turn Dual-position Chipper

The equipment consists of six parts: the moving mechanism, the switching arm structure of the sucker, the transmission structure of the sheet, the mechanical switching lifting mechanism, the vacuum system and the wireless remote control electrical control system. The glass sheet is automatically turned from the vertical direction to the horizontal position and transmitted to the required worktable according to the signal.

Note: Customized development can be carried out according to the special requirements of customers.

The whole machine adopts full automatic centralized control and humanized design and control. The original glass to be cut is placed on one or both sides of the equipment. The direction/number of glass sheets is selected by the operator (Note: the position/number of sheets/full automatic switching has been set, and the continuous operation has been achieved). The whole process of the sheeting is automatically completed by PLC control. Manual mode can also be selected for glass slicing/placing. The whole set of motion is automatically completed from the flip of the film taking to the completion of the film feeding. The whole machine is reasonable in design, simple in operation, sensitive and reliable in action. Hydraulic system is used to complete the overturn of sucker arm. Reliable vacuum system sucker has the function of slow positioning and high speed feeding, accurate positioning and fast feeding. It can be used with a variety of foreign automatic cutting machines, laminated glass production line, glazed glass production line, etc. instead of manual flipping, to improve efficiency, safety and reliability. This series of products are divided into single-side single-station, double-side single-station, single-side multi-station and double-side multi-station models. The thickness of the suction piece ranges from 3 mm to 25 mm. Customers can choose and order according to their own requirements

Main technical parameters

Power supply: three-phase four-wire system 380V + 10%, 50HZ + 2%, power: 6KW;

Use environmental conditions: altitude 1000M, ambient temperature: room temperature - 40 C, relative temperature: 85% indoor use;

Shape size: 4500mm * 2950mm * 900mm;

Processing glass thickness: 3-25 mm;

Upload period: 40-90 seconds adjustable;

Glass weight: 600KG;

Upper position type: single position/duplex position/multi-position; flip arm type: divided into single-turn/double-turn; (optional)

Frame travel speed: variable frequency adjustable;

The glass conveying speed of the supporting wheel is 30 meters per minute, and the area of the supporting wheel group is 3000 mm x 2500 mm.

Total: about 2 tons.

Essential information

Mechanical part

1) Overall: square pipe welding.

2) Drive: Use hydraulic system to do motion.

3) Driving optical axle and wheel, etc.: Domestic, transmission movement under the control of motor.

4) Suction cup and vacuum system: adopt Japanese brand.

Electrical part

1) Voltage 380 V, 50 Hz, equipment with isolation protection device to prevent damage to interference control components.

The whole control process of the product: computer control, after issuing instructions, the upper tablet automatically starts the action of taking the tablet. After adsorbing to the table, it is positioned by the photosensitive switch and transmitted directly to the cutting table. After laser positioning, the cutting table is cut.