Glass cutting machine

1. Area of equipment working area: 6500 mm *2450 mm *900 mm (the following figure is the schematic diagram of equipment)

Note: Customized development can be carried out according to the special requirements of customers.

2. Brief description:

This machine belongs to a practical and new type of glass upper slice cutting machine. Its features are: there are running rails on both sides of the chassis, a moving mechanism composed of two main, driven wheels, reducer and transmission shaft on the bottom of the chassis, and a glass automatic upper slice mechanism composed of elevator, overturning arm, overturning arm, driving shaft of the small arm, main and auxiliary connecting rods, sucker assembly and limit switch. Four workbenches with legs, fixing plates and bolts are fixed; there are longitudinal guide rails and racks on the front and rear sides of the frame; main drive wheels, servo motors, monitors, electronic control cabinets are installed on the side force plates; there are inherent cutter beams between the two sides of the force plates; there are axle slide rails, SBR guide rails, through axles, transverse racks and automatic cutting mechanism of the cutting tool head. The machine operates remotely, saves people, saves money and occupies small space, and is suitable for glass processing enterprises.

Product characteristics:

1) One equipment function can top two equipment

2) Spend less money to do more, have less space to do bigger things.

3) Advanced design, high efficiency and energy saving. 40% power saving

4) High-end configuration, low failure rate

Function: Film-up, cutting (straight line, profile)

3. Equipment performance and working principle:

The glass is placed in a designated position. After giving the signal of the pick-up, the pick-up sucker is automatically turned up and the glass is adsorbed and placed on the conveyor roller of the pick-up table. The glass is automatically conveyed to the main machine of the cutting machine.

It is mainly composed of a frame, a sucker overturning mechanism, a sucker moving mechanism, a conveyor roller and an electric control cabinet.

The whole working process can be accomplished by PLC automatic control or manual control. The manual mode is mainly used in equipment adjustment and maintenance. Each action can be completed independently or can be used for normal work. After giving the signal (manual or automatic), the overturning system works. The motor drives the mechanical reverse mechanism to turn the sucker arm up and stop the overturning when it reaches the same inclination angle as the glass. The forward motor makes the sucker move. When the detection switch near the top sucker touches the glass, the forward motor stops. When the vacuum system works, the suction cup begins to absorb the glass. When the vacuum pressure switch reaches the set pressure, the vacuum pump stops, and the suction cup's telescopic connecting rod mechanism lifts the glass through the motor drive. After stopping about a few seconds at this working station, it ensures that the single glass is sucked up. The motor drives the mechanical overturning mechanism to reverse the glass to the cutting table, and the telescopic connecting rod mechanism makes the suction cup and the glass at the same time. When landing, the sucker blows compressed air to release glass quickly, the transmission mechanism stops and returns to the flat position. When the glass is moved to the fixed position of the cutting table, it is cut. After the cutting is finished, the glass is moved to the breaking table to break the pieces. After receiving the signal, the machine automatically lifts the glass to take the pieces.

Technical parameters:

1) Upper Size Range: MAX Upper Size: 2440*2000mm

2) Upper film thickness: 3-19 mm.

3) Update period: 40-60 seconds

4) Transmission speed: 0-40m/min (adjustable)

5) MAX suction depth: 700 mm

6) MAX: 1000KG

7) Number of upper arm on one side: 3 arms.

8) Number of single arm suckers: three.

9) Upper flip arm: single flip

10). Film Uploading Position: Single Position

11), Power/Power: 380V/50HZ

Installation power: about 3.5KW

13) Compressed air: 0.5-0.8 Mpa

14) Vacuum pressure: -70-90 Kpa

Mechanical configuration:

1) Flip sprocket chain: special high-precision reinforcement.

2) Vacuum sucker: imported green butadiene rubber (double adsorption structure)

3) Transfer/Flip Motor: Taibang Motor

4) Vacuum pump: Sino-foreign joint venture PUJIANG