Main Technical Indicators of Horizontal Steelmaking Furnace Unit
Flat steel:
Specification 2500mm * 4000mm;
Specification 700 mm x 400 mm
Glass thickness 4mm-19mm
Production capacity 200_/h (5mm)
Power consumption is less than 3 degrees per square meter (5mm meter)
The overall yield is more than 98%.
Heating power 403KW
Fan power 200 KW cooling 90 KW
Installed power 800KW
Quality conforms to GB9963-2005 standard
The arch deformation is less than 2.0/1000mm and the waveform deformation is less than 1.5/1000mm.
Wind spot is invisible on a single sheet (1000mm observation distance, natural light, angle with glass surface greater than 15 degrees, naked eye observation)
Air compressor (user supplied) flow rate 1M3/min, pressure 0.8Mpa, power 35KW
Pressure withstanding value 1 Mpa, working pressure 0.8 Mpa and Volume 1 M3 of gas storage tank (supplied by customers)
Installation area: 32 meters long and 10 meters wide
Weight: 13-20 tons
Note: Customized development can be carried out according to the special requirements of customers.
Scope of supply:
Upper and lower tables, windshield, passage section, corresponding electrical control system (hardware and software), operating table, fan, fan frequency converter, wind path, vulnerable spare parts, technical data, operation instructions, etc.