What are the characteristics of products produced by small-scale steelmaking furnace manufacturers?

1. Energy-saving thermal insulation technology

The selection of high quality insulation materials and the adoption of international advanced anchorage installation technology not only greatly reduces the external heat conduction of the metal fixtures in the furnace, reduces the power consumption, but also makes the structure of the small steel furnace strong and durable, and greatly prolongs the effective life.

2. Professional Steelmaking Technology

Based on the principle of aerodynamics and the accumulation of long-term experiments, a special tempering and cooling system is formed in the small-scale tempering furnace by means of computer simulation technology, which makes the tempered products reach advanced level both in appearance and in internal quality.

In addition, FRP furnace forming mechanism, free bending equal arc, variable arc, and even conical bending toughened glass, to ensure that the bending steel products arc accurate and smooth, to meet the imagination of architects. Many options make the product quality higher and easier to control. There are many optional configurations, such as intelligent parameter setting, temperature graphic monitoring in furnace, product quality management, semi-steel function and other optional functions and mechanisms, which make product quality guaranteed multiple, easy to operate and maintain.

No matter what kind of products, only the equipment in good operation can produce high-quality products, so, whether it is general equipment or small-scale steelmaking furnace equipment, daily maintenance is necessary, in order to prevent the impact of its service life! The steelmaking furnace manufacturer will share with you some maintenance of the steelmaking furnace.

When the optical effect of tempered glass is poor or explosion occurs, the small tempering furnace should be stopped in time to cool down. Processing as follows. Surface roughness of ceramic roller: Cause: Small glass fragments or other materials are embedded or adhered to ceramic.

Processing steps:

1. Use a scraper to gently cut and scrape away broken glass or other foreign bodies embedded in ceramic rolls.

2. Clean the attachment on the surface of ceramic roller with plastic brush, and attach it with vacuum cleaner at the same time.

3. Grind the revolving ceramic stick with 400-600 fine corundum water sandpaper until the surface of the ceramic stick is smooth with the touch.

4. Use a vacuum cleaner to quickly absorb the dust on the surface of the ceramic roll of a small tempering furnace.

5. Use clean and soft white cloth to wet and soften the water from the middle to both sides (never back and forth) until there is no dust.

6. Ceramic rollers in small tempering furnaces should be avoided from excessive grinding to avoid damage to surface enamel.

7. For the sake of safety, safety pins should be inserted in the above cleaning work when cleaning porcelain.

8. Porcelain rollers should use distilled water or pure water as the principle. Do not use other alkali cleaners or chemical agents.

9. After the above cleaning treatment, the automobile glass tempering furnace should be heated up to about 200 degrees, and then heated after 1-2 hours.